Fan, video card, and power cable are not included. This kit is the 3D printed shroud and mounting hardware only.
A compact fan shroud kit for Nvidia Tesla cards, built around a 40x40x28 mm fan that slots in flush with the top of the print. A retention bolt secures the fan instead of fragile clips, and the fan height is adjustable with that same bolt. Installed, it adds only 1.48 inches to the card.
Works with these video cards:
Nvidia Tesla V100
Nvidia Tesla P40
Nvidia Tesla P100
Nvidia Tesla K20
Nvidia Tesla K40
Nvidia Tesla K80
Nvidia Tesla M10
Nvidia Tesla M40
Nvidia Tesla M60
It will not fit other cards.
In the kit:
The 3D printed fan shroud
The 3D printed retention bolt
4 bolts (one spare)
Allen wrench
Tested fan: 40x40x28 mm; 10 CFM or higher is ideal.
